XTREME OUTLAW CHASSIS WORKS
KEITH FEDIRKO - PRESIDENT 
7923 Route 873 Slatington, PA 18080
   phone : 484-553-6031  
sales@xtremeoutlaw.com

Performance Clutch Kits

 


For All Your Performance Muscle Car


And Street / Strip Car Needs.

 

Spec Clutches & Flywheels



  www.specclutch.com


(The Complete SPEC Application guide can be found here)


SPEC is a Manufacturer of street high performance and racing clutches and flywheels. Featuring Clutch Kits From street kit Stage 1,2,2+, 3, and 3+ to Race Kits Stage 4 and 5. And now the SPEC Super Twin with TQ ratings of over 1500 FT TQ ! Every SPEC Clutch Kit and Flywheel has been SFI Approved.



 

 

EXEDY Multiplate Clutch Kit

Product Image May Not Be Vehicle Specific

Part Number: ET03SD

For high-powered applications EXEDY offers Multi plate clutches. These are designed for hot street action as well as drag, road, and rally racing. All of our multi plate clutches come with a lightweight chromoly steel flywheel, and the famous purple anodized forged aluminum clutch cover. Depending on the application, both strap drive and lug drive models are available. All have T5001 cerametallic friction materials for extreme heat resistance. The multi plate clutches are rated up to 800+ foot pounds of torque at the flywheel. And come with spring damper or solid discs depending on the application.


Specs

Number of Discs Twin
Spring Damper Discs SPRUNG CENTER DISC
Push / Pull PUSH TYPE
Disc Outer Diameter 215mm
Spline Teeth / Major Diameter 26T / 29mm

ET03SD 1996-08 MUSTANG 8 Bolt Crank, TREMAC TRANS, (3); 4.6L(ALL)





EXEDY

EXEDY Hyper Single Clutch Kit

Product Image May Not Be Vehicle Specific

Part Number: EH04SD

All Hyper Clutches come with a steel flywheel and a 6-puck disc with cerametallic facing, and a spring center damper. The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and generally higher than other single plate clutches.


Specs

Number of Discs Single
Spring Damper Discs Sprung Center Disc
Push / Pull PUSH TYPE
Disc Outer Diameter 250mm
Spline Teeth / Major Diameter 26T / 29mm

This Part Number Fits:

FORD
EH04SD 1996-08 MUSTANG 8 Bolt Crank, TREMAC TRANS, (3); 4.6L(ALL)



EXEDY

EXEDY Stage 2 Cerametallic Clutch Kit

Product Image May Not Be Vehicle Specific

Part Number: 07956PCSC

EXEDY cerametallic clutches are designed to handle the abuse of high powered modified engines. Our cerametallic friction material can handle much more slippage than stock type disc assemblies without slipping and fading. All cerametallic discs feature spring center dampers to reduce impact and shock loads.

We offer two types of cerametallic discs:

  • Normal Thickness (Thick)
  • Reduced Thickness (Thin)

Normal thickness discs have greater heat capacity and therefore better durability in demanding applications such as all wheel drive.

Reduced thickness discs offer greatly reduced inertia to improve shift efforts and improve synchro durability. These discs are approximately 1/2 the thickness of a stock disc and are recommended for track use only.


Specs

Thin / Thick Thick
Disc Outer Diameter 280mm
Spline Teeth / Major Diameter 26T / 29mm

This Part Number Fits:

FORD
07956PCSC 1996-04 MUSTANG 4.6L(ALL)




EXEDY

EXEDY Stage 1 Organic Clutch Kit

Product Image May Not Be Vehicle Specific

Part Number: 07806CSC

EXEDY organic racing clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the preferred clutch for street and light horsepower track use. Driveability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads. All of our clutch discs have spring center dampers to reduce drivetrain shock.


Specs

Disc Outer Diameter 280mm
Spline Teeth / Major Diameter 26T / 29mm

This Part Number Fits:

FORD
07806CSC 2005-08 MUSTANG 4.6L(ALL)






Xtreme Outlaw Chassis Works
Germansville, PA 
ph: 610-760-9191
sales@xtremeoutlaw.com

Website Builder